Valterra Bladex 3" waste valve
I have to replace the dump valve for my black tank. It looks like a fairly simple job. There are 4 bolts keeping it in place. I have a new one but the problem is the 2 rubber seals that came with it. ...
Forum Discussion
I got that Bladex waste valve replaced Thursday evening. It took my wife and I about 30 minutes from start to finish. The only problem we had was that one of the seals got out of position as we were putting the new valve in. I got that seal where it belonged, bolted the valve in place and then put 5 gallons of water in the tank. No leaks, so I added another 5 gallons of water in the tank, still no leaks. We're good to go. That job was not as hard as I thought it would be. I might mention that my wife and I prayed before starting that task that GOD would guide us. HE sure did!! Prayer works!!!
