3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
What would it take for someone to fabricate an LP conversion and ship it to me?
*Here is where I am at with things so far...
-I am wanting an electric start open frame 3500 generator...using
LP for fuel.
I am going to be talking this unit all apart and custom mounting it into our 1977 Dodge Apache 23' MH.
**I have been through the search function four a few days on end now...I also have been through the most recent 250 posts and have found alot of great information that will be used in doing my fabricating...but...the conversion for whatever affordable electric start genset is stumping me.
***I have a decent ability in fabrication skills...am decently mechanically/electrically able...I just like to research the heck out of things before I do them and have not gained the needed confidence about converting from gas to LP to decide to do it.
*I have been eye-balling this particular unit...but am still very much undecided at this point...I am all about the e-start feature, 2500-2800 watts normal use..and price(along with converting to LP)
http://cgi.ebay.com/Quiet-Portable-Electric-Start-RV-Gas-Powered-Generator_W0QQitemZ200570331902QQcategoryZ46412QQcmdZViewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26its%3DI%252BC%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D10%26pmod%3D200560382449%26ps%3D63%26clkid%3D6836506663130943691
Any much needed help is appreciated...
thanx, Dan
*Here is where I am at with things so far...
-I am wanting an electric start open frame 3500 generator...using
LP for fuel.
I am going to be talking this unit all apart and custom mounting it into our 1977 Dodge Apache 23' MH.
**I have been through the search function four a few days on end now...I also have been through the most recent 250 posts and have found alot of great information that will be used in doing my fabricating...but...the conversion for whatever affordable electric start genset is stumping me.
***I have a decent ability in fabrication skills...am decently mechanically/electrically able...I just like to research the heck out of things before I do them and have not gained the needed confidence about converting from gas to LP to decide to do it.
*I have been eye-balling this particular unit...but am still very much undecided at this point...I am all about the e-start feature, 2500-2800 watts normal use..and price(along with converting to LP)
http://cgi.ebay.com/Quiet-Portable-Electric-Start-RV-Gas-Powered-Generator_W0QQitemZ200570331902QQcategoryZ46412QQcmdZViewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26its%3DI%252BC%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D10%26pmod%3D200560382449%26ps%3D63%26clkid%3D6836506663130943691
Any much needed help is appreciated...
thanx, Dan
