3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
Beach-Rat wrote:
Dr Baker.. I also am mounting a Champion 3500/4000 on a Lippert pin box. I like your design but it would put the genny right in the middle of my bed fuel tank. My design will attach to the spare holes on each side of the pinbox/frame attachment. The genny will be 11 inches above the king pin plate, this will allow it to clear the bed tank when the trailer/truck are in a full flex (center low).. The genny will be half over the pin box and half extended out to the front. My design has the genny facing the 5er, hot muffler will be away from trailer and the heavy side of genny will be over the pinbox with the light side extending out front.. there will be 6in between genny and trailer wall.
Just made materials list today.
Will try and post pictures as it develops..
I'm definately not the most creative, so I'm sure there are better ways to do it. I got lucky and my first attempt seems to work well. I can easily start the genny while I'm standing beside the truck. Keep us updated with pics if you can. I may be able to steal some of your ideas to improve on my setup.
I ran it today at a truck stop so my dogs could have AC while I went into the McDonalds for lunch. They were happy to stay cool while we rested a bit and ate a bite.
