Bottle Jack question
Do they make a hydraulic bottle jack with a removable large flat base ? For instance an 8" x 8" metal plate? My small bottle jack lifts one of my trailer tandem axles with ease, but I always fe...
Forum Discussion
Thanks everyone
After I posted this yesterday, I screwed around in my shop, and made one out of a piece of 3/4" x8" square plywood with clips that hold the jacks base to it.
I used wing nuts to hold down the clips.
After looking at the replies here, I see one that is designed similar, but their base is not as big.
If it ever stops raining here, I'll try it out
Jack L
After I posted this yesterday, I screwed around in my shop, and made one out of a piece of 3/4" x8" square plywood with clips that hold the jacks base to it.
I used wing nuts to hold down the clips.
After looking at the replies here, I see one that is designed similar, but their base is not as big.
If it ever stops raining here, I'll try it out
Jack L
