Dometic DM2652 Refer Not Working
My condensate line on my refer was brittle and fell apart. I removed the refer and replaced the tubing. It should have been an easy task, unplug from 120VAC, disconnect 12VDC wires, remove LP line, re...
Forum Discussion
To those who replied: it’s not 120v problem, there is 120v to control board. It is not a gas problem, there is no spark ignition to light gas. It’s as if control board needs reset or something, there’s 12VDC to the board, there’s 120VAV to the board just nothing on the “output” side. No 12VDC out, nor any 120VAC out.
