Fuses/Breakers
Looking to add fuses/breakers on my setup: Batteries: 2x6 volt T-105 Solar: 2x100 watts, 30 amp PWM controller, #10 AWG wire panel to controller, #10 AWG to battery. Inverter: 1000 watt PSW, #4 A...
Forum Discussion
Inverter and controller are 3 feet from the battery.
4 AWG works fine for my present loads.
Connections on the battery are controller, inverter, and trailer main.
Read somewhere to connect controller to inverter leads. Pros and cons?
Should I be using a buss bar?
4 AWG works fine for my present loads.
Connections on the battery are controller, inverter, and trailer main.
Read somewhere to connect controller to inverter leads. Pros and cons?
Should I be using a buss bar?
