Help with Roof
All - As always, appreciate in advance any help. Going down the road the other day, my 2018 Heartland Trail Runner had the roof membrane peel back. It ripped back about 5 feet from the edge of...
Forum Discussion
agesilaus wrote:
I did some patching on our old fiver. I don't know why you are plan to cut the flap off. I would put that back down with dicor under it and then cover the whole torn area with new material as you describe. Eternabond or this new super strong 4 inch Gorilla tape around the edges.
I used Hengs coating over the whole roof after that but that's optional.
Appreciate the response. I think I need to cut the old material off because I can't get it to lay flat otherwise. If I could get it lay flat, I would probably just try and do a small patch along the front edge to get it to go back under the cap, then along the rip. I fought with it about 2 hours yesterday trying to smooth it out and wasn't successful.
So, that is why I was just going to trim it back, then overlap with a new smooth piece up to and under the cap.
I should add, I am going to try and take pics tomorrow for insurance purposes, so I may try and attach them in a future post.
