Forum Discussion
Harvey51
Nov 12, 2016Explorer
On my rig, black goes to the positive terminal and white is negative to ground. You could follow the wires to see which one is grounded.
The Ohms ranges on your multimeter could be used to see which wire(s) go to ground. On a low Ohms range check to see what happens when you touch the two leads together - should read near zero. Then hold or connect one lead to to chassis ground and touch the other one to each wire in turn and see which one gives a near zero resistance.
The Ohms ranges on your multimeter could be used to see which wire(s) go to ground. On a low Ohms range check to see what happens when you touch the two leads together - should read near zero. Then hold or connect one lead to to chassis ground and touch the other one to each wire in turn and see which one gives a near zero resistance.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,189 PostsLatest Activity: Jan 19, 2025