Forum Discussion
Ron_Nielson
Jul 05, 2015Explorer
Test underway. I ran into a potential problem:
When the leads to the AC heater are disconnected, this gives an H error code on the display, meaning that there is no output from the AC heater connections on the board. I think that's to be expected.
Test continues. The area by the heater canister is quite hot, so that's expected. Freezer and fridge compartment at 82* 4:15PM 7/5.
When the leads to the AC heater are disconnected, this gives an H error code on the display, meaning that there is no output from the AC heater connections on the board. I think that's to be expected.
Test continues. The area by the heater canister is quite hot, so that's expected. Freezer and fridge compartment at 82* 4:15PM 7/5.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,193 PostsLatest Activity: Jan 26, 2025