Power Windows dont work
I took the Battery Terminals off to clean then hooked them back up again. I examined the Circuit Breaker plug in Module for the Power Windows in the Fuse Panel and I get continuity across its two p...
Forum Discussion
From what I'm reading now,
1. Make sure there isn't a wire hiding behind the battery now, that you removed to clean and missed on re-assembly.
2. Do the "wiggle test" on the remaining wiring connected to the battery. Vibration and Corrosion can cause the connection to fail. Even though the wire is still in the connector.
1. Make sure there isn't a wire hiding behind the battery now, that you removed to clean and missed on re-assembly.
2. Do the "wiggle test" on the remaining wiring connected to the battery. Vibration and Corrosion can cause the connection to fail. Even though the wire is still in the connector.
