Suburban Anode Replacement - Anti Seize?
I'm replacing my Anode, and I had to work pretty hard to remove the anode (alternating between tightening and loosening as well as penetrating oil). I know if I wrap the threads in teflon tape, the...
Forum Discussion
FWIW, I finally pulled the rusted anode rod that was hanging on by only a thread. I bought a pipe end 3/4" NPT at Tractor Supply and gradually worked it in and out of the heater female thread. Cleaned all the rust off the anode and was able to get the rod in 3 turns. It still leaked about 1 drip every 10 seconds. I was tired of fooling with it so I wrapped it with two layers of Teflon tape. Now it doesn't leak at all. I'll keep an eye on it but if I don't see any leaks I'll stick with the tape for a seal.
