Suburban SW10DE water heater
I have been having issues with the electrical side of my water heater, and in the interest of saving propane (and having hot water should I stupidly let myself run out of propane like I did the other ...
Forum Discussion
You should be able to replace the gas valve, manifold, and burner tube w/orifice for a bit over $110- you would need :
These are full flaming retail prices. As long as you don't turn on the LP switch, there should be no problem- you can pull a wire from one of the valve solenoids to make sure no LP flows.
- p/n 161109 gas valve, 3/8" in. 1/4" loxit out $76
- p/n 171420 manifold $10
- p/n 171463 loxit nut (2 required) @ $3.79 ea
- p/n 10843 burner tube w/orifice @ $26
These are full flaming retail prices. As long as you don't turn on the LP switch, there should be no problem- you can pull a wire from one of the valve solenoids to make sure no LP flows.
