Transfer switch
It's a 2008 got it a couple weeks ago can't figure how to swap to generator power
Forum Discussion
If the unit did have a (Automatic) Transfer Switch then it would automatically switch to the generator (from shore power) after a one minute (or so) delay following generator AC power is applied.
For one NON ATS example, our Class C does not have an ATS, we must plug our 30 Amp male into a 30 Amp female which comes from the generator and is located in the bay where our 30 Amp cord is stored.
For one NON ATS example, our Class C does not have an ATS, we must plug our 30 Amp male into a 30 Amp female which comes from the generator and is located in the bay where our 30 Amp cord is stored.
