Truck Battery Relay
Recently installed a 1000W inverter in my truck, 60A fused cables to it. But want to add a ignition switched battery relay to be sure the inverter only runs when the truck is running. So was thinki...
Forum Discussion
JaxDad wrote:
I've had good luck with these from Princess Auto, their return policy is certainly second to none.
I've used them on numerous things including the house battery charge circuit on my Class C motorhome, it's probably got 20,000 km of driving on it now.
12 volt 80 amp Solenoid
In case link doesn't work.
https://www.princessauto.com/en/detail/3-angled-12v-ignition-solenoid/A-p8277766e
Thanks, I had forgotten Princess Auto. There's one not too far from me.
I see they also have a simple electronic isolator:
Princess Auto Battery Isolator
Looks like it cuts in at 13.3V and out at 12.8V.
Finding an ignition 12V in my engine bay might be a bit difficult. This isolator would solve that.
