BurbMan
Feb 25, 2022Explorer II
Venting Batteries in 5er Basement?
Our new-to-us 5er has one group 24 battery in a front side compartment with the hydraulics for the slide mechanisms. It's in a vented box with a hose that exits the front of the camper.
In our previous TT we had a pair of GC-2's mounted on the tongue that worked well for us. Only had a 150w PSW inverter for TV/laptop, etc. Converted all the lights to LED so the only real power hog is the furnace. Always wanted another pair of GC2's but had nowhere to put them in the TT.
I was thinking of going to a pair of LiFePO batteries, but based on comments from an earlier thread will probably stay with the GC2's. I've got plenty of storage now in the 5er but need to vent the battery bank if I install in the basement.
Looking for ideas/suggestions on battery boxes or setups on how you vented 2 pairs of GC-2s.
In our previous TT we had a pair of GC-2's mounted on the tongue that worked well for us. Only had a 150w PSW inverter for TV/laptop, etc. Converted all the lights to LED so the only real power hog is the furnace. Always wanted another pair of GC2's but had nowhere to put them in the TT.
I was thinking of going to a pair of LiFePO batteries, but based on comments from an earlier thread will probably stay with the GC2's. I've got plenty of storage now in the 5er but need to vent the battery bank if I install in the basement.
Looking for ideas/suggestions on battery boxes or setups on how you vented 2 pairs of GC-2s.