http://www.mouser.com/ProductDetail/United-Chemi-Con/E36D500LPN103TA67M/?qs=sGAEpiMZZMtZ1n0r9vR22eR2bRpDnYLenEFVrOOgPd0%3d
Image data wrong. Link is to a 10,000uf electrolytic capacitor. Uses 2 10x32 terminal screws. One + and one -
Connect + to power wire going into pump. Connect - to chassis negative wire at pump. Two wires, one red and one black. 2 10x32 ring terminals and a pair of "T-TAP" pinch on terminals.
Observe polarity that + goes to positive. This ends all lighting fluctuations forever. I've QUIETED many a Shur Flo pump as well as cured flickering lights by adding a capacitor. Cost, installation are negatives although very minor. Advantage: No snipe hunts.
