'71 Starcraft Wanderstar- "The Hilton"
Thought I should post this up because the "Search" feature doesn't return any results and there might be some useful info for older Starcraft owners or those that are mad enough to embark on a complet...
Forum Discussion
Haven't had much time for restoring, this week, my work schedule is getting in the way. Today, I processed some more cedar 2 x 4's into usable framing for the seating.
The wraparound seating plan is still on track but the table pedestal plans may be changing. I need to get a lower height of 15" and would like to get an elevated height of 29". The lower position dimension can't be fudged because it has to meet the seat heights. It may not be possible to get all of this to the proper lengths without using a third vertical piece or adding in a threaded support underneath the table. I may just make a pedestal that can be removed so that the whole pedestal is fixed and after removal, the table can be placed onto the cleats in the lower position for a bed.
Any ideas on this?
The wraparound seating plan is still on track but the table pedestal plans may be changing. I need to get a lower height of 15" and would like to get an elevated height of 29". The lower position dimension can't be fudged because it has to meet the seat heights. It may not be possible to get all of this to the proper lengths without using a third vertical piece or adding in a threaded support underneath the table. I may just make a pedestal that can be removed so that the whole pedestal is fixed and after removal, the table can be placed onto the cleats in the lower position for a bed.
Any ideas on this?
