Hello.Yup, a add-on for the almost blind old guy. I probably mentioned here before that I have lost 95% of my central vision from Macular Degeneration. Added the CAMPER CRADLE. It was difficult for me to see if the tc was centered when Brenda back up to it. Not any more. Now when she gets up to the roller I tell her to stop. She puts the truck in park and sets the parking brake. I reach to the roller to feel where the tc is hitting it.. The 2 times we have use the cradle she was almost perfect. I would tell her to back up and the roller would move the tc a smidge and in to the truck the tc goes centered. And it stays centered going down the road.https://www.youtube.com/watch?v=IIlD54hP5jghttps://www.youtube.com/watch?v=8DSN4NitxUUI did the install myself. Easy peasy. Brenda came out and read the tape measure to make sure that the distance between the rollers was correct.Now have to come up with something to keep the front end of the tc up by the cab from moving side to side. Thinking of a wood curb bolted to the floor. Those of you folks that have this issues,. What have you done to stop the movement.I have the Fastguns as tight as I can get them.Brenda and Bill2014 Chevy Silverado 3500HD Duals CC 8' bed LTZ Dura Max 6 speed AllisonSafe Travels2020 Lance 1172I have tried several time to delete my old signature listed below but it never updates. So I qui trying.

woodworker414 wrote:I have tried several time to delete my old signature listed below but it never updates. So I qui trying.When you made the changes to your profile/signature did you scroll to the bottom of the page and click on Submit Changes?It's a common mistake.

Also check both My Preferences and My Profile and delete it. Then make sure you scroll to the bottom of the page and click submit changes.

Cool. If I unloaded a lot,I would have them.As far as your sliding around----1-- No plastic bed liner!!!2-- Rubber bed mat3-- Blocks of wood, if necessary.

You don’t want the Fastguns as tight as you can get them. You want them as tight ad they are supposed to be and no more. Too tight and you risk compromising the camper’s attachment points.For the front: If you use something wide enough to spread the load a bit, loose blocks between the camper and bed wall should stop the movement. If they want to move in transit, attach some thin plastic sheeting to the bottoms and set the camper down on the plastic to hold them in place.

gbopp, thanks for the reply. I thought that I did click on savvechanges. I will go back again to make sure.Brenda dnd Bill2014 Silverado LTZ,3500HD, 4x4, CC, LB, DuraMax, 2020 Lance 1172Safe Travels

A add-on for the almost blind old guy | Good Sam Community

18 Replies

woodworker414
Explorer
Oct 07, 2021
Pete_k, thanks for the reply. As I mentioned in my post the tc only moves a smidge. I DO NOT USE THE ROOLERS to move the tc. Brenda has to in the center before I tell her to backup. I know that you can't move the jacks that much, Yes, something will break.
Pete_k
Explorer
Oct 07, 2021
burningman wrote:
It’s amazing the effort people will go to avoid learning how to look in their mirrors!
You really don’t need all this junk. If you would just pull way out ahead of the camper, several truck-lengths, get square and back under it while sighting down the jack legs on both sides, making them both the same, you’d slide right under it square and straight every time with ease.
Using a roller to force it into position when it isn’t is gonna be stressful to the jack mounts. I wouldn’t use this thing.

Guy we used to camp with. Destroyed 2 sets of jacks doing the roller deal. As he would move the camper at times 3 or 4" sideways. I told him that after the first set. After he messed up the second set. I think he learned his lesson.
Roller is a good ideal, if your right to start with. But if you use them to move the camper over. Something has to give. Weak point is jacking mounting points. Or the jack legs there self.
burningman
Explorer II
Oct 03, 2021
It’s amazing the effort people will go to avoid learning how to look in their mirrors!
You really don’t need all this junk. If you would just pull way out ahead of the camper, several truck-lengths, get square and back under it while sighting down the jack legs on both sides, making them both the same, you’d slide right under it square and straight every time with ease.
Using a roller to force it into position when it isn’t is gonna be stressful to the jack mounts. I wouldn’t use this thing.
woodworker414
Explorer
Sep 30, 2021
MORSNOW, thanks for the reply nice rig, nice campsite. I am glad I put the Camper Cradle on. After only 2 times of using it, I can tell it really solved our centering problem.
. I am going to look at the Happijack centering bar.
MORSNOW
Navigator III
Sep 30, 2021
I recently purchased a Camper Cradle too, it made loading so much quicker and easier to get it perfect every time. I used to spend a lot of time getting the camper perfectly square in the bed, but not anymore! HappiJac's front crossmember bar has centering posts that line up the front perfect.
Grit_dog
Navigator
Sep 30, 2021
deltabravo wrote:
woodworker414 wrote:
I have tried several time to delete my old signature listed below but it never updates. So I qui trying.

Duramax is one word, so that needs changed too.

Lol, it must be hard for you to handle the rest of the world that isn’t as perfect as you are…
Fwiw, that was a douchey comment.
woodworker414
Explorer
Sep 30, 2021
OOOOOOO ggggggeeeeezzzzz.
More help needed. I have looked, but can not find where I change the Good Sam Club Member. I am a Life Member., and I would like to display it.
Thank You for you help.
woodworker414
Explorer
Sep 30, 2021
WWWWWAAAAAAHHHHHHOOOOOOO
I did it RIGHT this time.
I changed my signature.
WWWWWAAAAAHHHHHOOOOOOO
woodworker414
Explorer
Sep 30, 2021
deltabravo, thanks for the reply. I just, hopefully, changed my signature. I made sure that I click the SAVE CHANGES button. And at the top of the page it said that my changes have been saved.
deltabravo
Nomad
Sep 30, 2021
woodworker414 wrote:
I have tried several time to delete my old signature listed below but it never updates. So I qui trying.

Duramax is one word, so that needs changed too.