Camper jack torn off driving
***Link Removed*** Gentelmen, I have a 2001 Okanagan. Front passenger side jack dropped down when I was camping and I didn't notice it. I drove off and it sounded like I drove over my fly rod. U...
Forum Discussion
I don't see any lag bolts holes at all.
But picture shows only 1 side, so there is big margin for error.
Still all TC mounts I have seen have additional angle-liner inside, so the frame in the corner is sandwiched between the steel. Meaning if the light camper did not have it from the factory, I don't see much trouble to do it now.
Only floor frame has bigger wood chip, so there is lot of good wood to sandwich and 4 bolts going on other side can't be beat.
I also like the diamond plate idea.
But picture shows only 1 side, so there is big margin for error.
Still all TC mounts I have seen have additional angle-liner inside, so the frame in the corner is sandwiched between the steel. Meaning if the light camper did not have it from the factory, I don't see much trouble to do it now.
Only floor frame has bigger wood chip, so there is lot of good wood to sandwich and 4 bolts going on other side can't be beat.
I also like the diamond plate idea.
