Military grade aluminum LOL
Watch this Troy then ask yourself if this is what you want your next truck made out of!
Ford Tough NOT!
Don
Ford Tough NOT!
Don
Forum Discussion
75 Replies
NC Hauler wrote:
BB_TX wrote:
You Ram and GM boys need to review the crash test before denouncing the "military grade aluminum" Ford.
Pickup crash test.
Measures taken from the crash test dummy in all but the F-150 indicated a likelihood of serious lower leg, ankle and foot injuries.
"Drivers in these pickups would need help freeing their legs from the wreckage following a small overlap crash.
My sympathies when they are trying to free your feet and legs from the wreckage of your trucks with a poor rating.
DANG!!!:E..So even those of us who said nothing negative about Ford, it appears as though you're actually hoping we who own a Chevy/GM or Ram may have a wreck and WILL have to be cut out of our trucks with feet and legs mangled..Just my perception of your statement...Pretty sick to the point of being hateful and spiteful, over something as silly as talking about truck beds?!? Who really cares??...Every brand gets slammed in these forums, but very few talk about someone needing to be cut out of their truck with morbid injuries to their feet and legs.....it's gotten that bad:?
Jim
the facts are right there in the Video, how is that spiteful?BB_TX wrote:
You Ram and GM boys need to review the crash test before denouncing the "military grade aluminum" Ford.
Pickup crash test.
Measures taken from the crash test dummy in all but the F-150 indicated a likelihood of serious lower leg, ankle and foot injuries.
"Drivers in these pickups would need help freeing their legs from the wreckage following a small overlap crash.
My sympathies when they are trying to free your feet and legs from the wreckage of your trucks with a poor rating.
DANG!!!:E..So even those of us who said nothing negative about Ford, it appears as though you're actually hoping we who own a Chevy/GM or Ram may have a wreck and WILL have to be cut out of our trucks with feet and legs mangled..Just my perception of your statement...Pretty sick to the point of being hateful and spiteful, over something as silly as talking about truck beds?!? Who really cares??...Every brand gets slammed in these forums, but very few talk about someone needing to be cut out of their truck with morbid injuries to their feet and legs.....it's gotten that bad:?
JimDirtyOil wrote:
It ain't a pick up truck until it has dents or scratches, regardless of whether its made of aluminum, steal, or wood.- It ain't a pick up truck until it has dents or scratches, regardless of whether its made of aluminum, steal, or wood.
- I saw the commercial. Sounded like they were saying the tool box is empty? The steel used on bodies today is quite brittle. Saw a 2009 Silverado at a body shop the other day. Metal fatigue on the bed was significant. It was splitting in places, and splitting around several of the spot welds. The shop was replacing the front wall, as it had a split toward the center running top to bottom. No fifth wheel hitch or bed liner. No sheet metal damage to floor, sides, or rails, only worn paint from having things slid in and out. Body shop owner is going to highly recommend Rhino Lining or Line X to the owner to cushion the steel from the vibration that is some of the cause of fatigue. He states vehicles built in the last 20 to 25 years exhibit a lot of metal fatigue that virtually never occurred prior to that time.
- The only way that manufacturers are going to reach the fleet average CAFE standards from now on is by either reducing weight and/or increasing engine efficiency (turbo/hybrid/smaller displacement/turbodiesel/electric/whatever).
Ford just happens to have taken the first large scale manufacturer (no, Porche is not a large scale manufacturer, even if they are owned by VW), to reduce the weight of their best-selling vehicle.
There will be bumps along the road, and people may have to change the way they do things (don't dump bricks from 4 feet up into your bed), but I think they are going along the right path.
Being ahead of the pack means some people may ridicule the steps that you take now, only to realize that you may be right later.
That being said, they could have made the bed out of carbon fiber. Lighter and stronger. - I bet if they put a bedliner in both trucks, neither one would have had any damage.
ronharmless wrote:
Perrysburg Dodgeboy wrote:
What you going to do when Dodge starts building their trucks out of aluminum? Forget you made all these snarky comments for the last two years?
Watch this Troy then ask yourself if this is what you want your next truck made out of!
Ford Tough NOT!
Don
it will be made from special Italian cummins aluminum! Far superior to anything ford or chevy can produce.Perrysburg Dodgeboy wrote:
What you going to do when Dodge starts building their trucks out of aluminum? Forget you made all these snarky comments for the last two years?
Watch this Troy then ask yourself if this is what you want your next truck made out of!
Ford Tough NOT!
Donlbrjet wrote:
The toolbox hole did make the bed look pretty flimsy.
I agree it make it look easy to put a hole in, but the question is how much weight was in the tool box?
I will say as a young kit when a tool box like that was every thing I owned it was pretty heavy, but now days it would only have what I needed for the job i was carrying it to.
