Modification help needed for gutter
The side awning was badly mounted on my camper. The mounting bracket was installed over the rain gutter. The bracket screws went through the gutter into the camper! I tried caulking around the sc...
Forum Discussion
bighatnohorse wrote:mkirsch wrote:
Remount the awning correctly as shown in Buzzcut's post.
Good idea, maybe. I did an inspection yesterday and believe that it can be done.
Problem is, making new drill holes 1/4 to 5/16-inch below the existing holes could be trouble.
I'm not sure how to address that problem. Maybe fill the old holes with epoxy?
tap in epoxy coated wooden dowels flush to TC wall then seal the outer area with non self leveling Dicor
