Supporting my Lance with three jacks
Hi I have been removing the Atwood jacks one weekend and jack at a time to straighten out ,change some lag screws and apply adhesive. This weekend my wife went out of town and she’s having car troub...
Forum Discussion
Here comes COG education again.
Would you happen to know your COG point, you can make cross lines between the jacks (you can simulate it on paper at smaller scale) and see how much forward of center cross the COG will be.
That will give you idea about comfort zone that will keep your TC from tilting on rear corner with missing jack.
Obviously moving COG to opposite side will increase comfort zone.
On my 12-foot Lance COG is at least 18" forward of center cross between the jacks.
Would you happen to know your COG point, you can make cross lines between the jacks (you can simulate it on paper at smaller scale) and see how much forward of center cross the COG will be.
That will give you idea about comfort zone that will keep your TC from tilting on rear corner with missing jack.
Obviously moving COG to opposite side will increase comfort zone.
On my 12-foot Lance COG is at least 18" forward of center cross between the jacks.
