Wooden fail safe camper alignment tool
I wanted something that keeps the truck camper aligned in the bed and prevents the camper from sliding sideways in trucks bed The main advantage is that the tiedowns aren't pulling the camper too m...
Forum Discussion
Sleepy:
You've been quite busy!
I really like the design. Very well thought-out. We have the same bed interior stamp-out as yours (both 8 foot; the only difference is: our truck is 1 model year newer, and is an SRW).
Our truck camper's "tub" section (the part in the bed when loaded) may be slightly differently dimensioned than the Lance you have. And, we have long rubber spacer blocks on our camper's bulkhead, but this would be easily adapted with a slight design change.
Great work,
Silver-
You've been quite busy!
I really like the design. Very well thought-out. We have the same bed interior stamp-out as yours (both 8 foot; the only difference is: our truck is 1 model year newer, and is an SRW).
Our truck camper's "tub" section (the part in the bed when loaded) may be slightly differently dimensioned than the Lance you have. And, we have long rubber spacer blocks on our camper's bulkhead, but this would be easily adapted with a slight design change.
Great work,
Silver-
