Need Pass-Through Deck Fitting for Electric Extension Cord

Question

I have an enclosed car trailer with a 3/4 inch plywood floor. Anyone have a link to a pass through fitting that I could install in the floor that would allow me to run an electric extension cord up from outside and up into the trailer. I would prefer something with a cap or lid on it to keep out water or debris from coming in through the hole when the extension cord is removed or when I'm towing the trailer down the road. Assistance appreciated.

executive45 · Answer

Almost all marine stores have bulkhead pass thrus...CW does also....DennisElectrical cord pass through

jim_cindy · Answer

Have you considered installing an extension cord thru the front of the trailer. Use what is called a cable clam. Only enough outside to plug into another extension cord. No need to get down under trailer to pass a cord thru and no hole in floor.

Cable Clam

royb · Answer

I always use LOWES for all of my PVC Electrical install components. The have a complete supply of PVC Electrical junction boxes, PVC Conduit, and clamps ETC... to give you a professional install.

It's neat sometimes to just go somewhere and look at all the various components items when doing a project.

Roy Ken

sdbounderdiesel · Answer

Exactly the info I was looking for. Thanks to all who replied. You've given me some excellent options to consider. Assistance appreciated!

stuplich · Answer

Jim Cindy wrote:Have you considered installing an extension cord thru the front of the trailer. Use what is called a cable clam. Only enough outside to plug into another extension cord. No need to get down under trailer to pass a cord thru and no hole in floor. Cable ClamOR 1 of these?..... (plus a household 15A duplex receptacle in the trailer).Mel'96 Safari

Forum Discussion

Need Pass-Through Deck Fitting for Electric Extension Cord

About DIY Maintenance

Related Content

Pass Through Storage

Pass through bath

Safety Mod Pass Through to Truck Window

Extension cords

Extension Cord