Soundproofing windows, hanging art...
Newbie, 1st post. Long-winded, but integrates two topics. I bought a '98 37' Allegro bus (cat/allison), and was quickly shocked by the high level of bidirectional noise through the stock windows. ...
Forum Discussion
The eyebolt and C-hook pics demonstrate how you can simply thread a pre-loop through the lower eyebolts and then run the line through that loop, pull it snug, and then tension the line diagonally to the upper opposite C-hook and make a snug loop at the top. This way, you can simply rotate the C-hook 180deg, slide the loop off, gently lower the artwork while threading the line through the artworks eyebolts to remove. The filament will still be secured to the walls lower eyebolts, preventing line loss/snafu aggravation. If the line is properly snug, it's not always a breeze re-mounting the art, but with focus, patience and practice you get the hang of the loop-and-rotate with the upper C-hooks.
Better ideas always welcome.
Better ideas always welcome.
