Forum Discussion

SACIL9151's avatar
SACIL9151
Explorer
Dec 12, 2019

2006 MONACO CAMELOT 42DSQ SLIDE CONTROLLER BOARD

have an issue with my slide control board. 2 slides not working and the controller board, made by IDS that no longer exists, is not to be found. The only information I presently have gotten is that i will need to rewire the four slides individually to separate boards for each slide. That is crazy but may be the only choice at this time? Any help would be appreciated. The board identification numbers are:
IDS 10667D
1790500905
I have no idea what the bottom set of numbers identify but the only board I that came close was a IDS 10667E and it does not work.

Any help?? Would be appreciated.
  • Have tried VIS one v, eBay, numerous others & REV GROUP, no luck,. Actually cannot find drawing to trace it all, IDS was purchased by lippert & they just bought the trill competition & abandon prints. Now just chasing wires!!
  • Can you post a Pic of the board? I have never seen a OEM use 1 board for multiple slides. They have a module for each slide. You have tried Rev Group? The "new" Monaco? Doug
  • Try dinosaur electronics. I know they have boards for other appliances, don't know if they have one for slides or not.
  • Try these people https://www.mmrvelectronics.com/about_us
  • Tom/Barb wrote:
    Tom/Barb wrote:
    I see ya already done that but https://rvcomponents.visonerv.com/cgi-bin/md/M2809/s1.pl


    https://rvcomponents.visonerv.com/cgi-bin/md/M2809/s1.pl
  • Tom/Barb wrote:
    I see ya already done that but https://rvcomponents.visonerv.com/cgi-bin/md/M2809/s1.pl


    https://rvcomponents.visonerv.com/cgi-bin/md/M2809/s1.pl