A&E Weather Pro Power Awning
How hard is it to replace a motor on a A&E weather pro power awning and where could I find a motor.
Forum Discussion
I just replaced the motor on my A & E power pro awning two weeks ago. It is not that hard at all, as long as you're ok being up on a ladder and have a 2nd person to help you with this, you most certainly CAN do this yourself, and you will save a ton of $$$ doing it yourself. Dometic has a very good video on their web site showing how to do this, that's what I went by. If you lived close to me (Charlotte, NC), I'd be happy to help you get it done. :)
There is a thread over in the general RVing forum that I started where I discussed this and how I ultimately got it done. Don't be intimidated by the rivets, very easy to drill old ones out, and a river gun can be had from harbor freight for $5 that you can use to rivet the new motor assembly back in. Not hard at all. I'll post you a link later to my thread on this subject. Feel free to PM me if you have specific questions.
There is a thread over in the general RVing forum that I started where I discussed this and how I ultimately got it done. Don't be intimidated by the rivets, very easy to drill old ones out, and a river gun can be had from harbor freight for $5 that you can use to rivet the new motor assembly back in. Not hard at all. I'll post you a link later to my thread on this subject. Feel free to PM me if you have specific questions.
