Allegro Bus 2003 Instruments not working
Hi there everyone, We have a 40 foot 2003 Allegro bus on a Freightliner chassis on which the instruments and warning indicators is not working on today. We were getting ready to take off with it a...
Forum Discussion
luvdoggiez wrote:
OK, So I found the VDC in the power cable bay in the back Drivers side bay. I've worked to remove and reseat the connectors on the VDC. Is there any junction box towards the front of the rig, in the cock pit area where the cable from the VDC terminates to and then branches off to the instruments? I can't find one, but that just might mean I haven't found it yet.
Thanks! - Eric-
Go here Freightliner SB 54-12
and download Freightliner SB 54-12 for troubleshooting info on your gauges.
I "think" you will find a connector going to the message center (the block of lights that illuminate with various messages such as "wait to start", etc) with another connector going to the instruments themselves (called a spider harness). I want to emphasize that I've never seen these connectors....just read about them.
Just my opinion, but I think you have a bad fuse or relay. I hope you find the problem. Please let us know the resolution.
Fred
