Automatic coach steps - SCS Frigette
For a while steps go out and "bump" 3 or 4 times and stop and come in the same way. Now they come out the same way but when the go in the still "bump" but then come about half way down and stop. Any i...
Forum Discussion
SCS steps complete their cycle (in and out) when the controller senses a rise in voltage and reverses itself which should occur at the end of the step travel.
In your case, I would first inspect for tightness due to lack of lubrication and/or binding in some way. Clean and lube everything before replacing motor or controller.
In your case, I would first inspect for tightness due to lack of lubrication and/or binding in some way. Clean and lube everything before replacing motor or controller.
