Bedroom slide breaking shear pins
I have a 2005 GB cruise air with 3 slides. Livingroom, kitchen and bedroom. When bringing in the slides I hold down two switches. When the slide is completely in or out it stops automatically and ...
Forum Discussion
fairway2002 wrote:
If I was trouble shooting. I would start with the plug marked signal. Maybe a open and closed sw. with using the body as a ground. Should be an easy test.
Good Luck
Our next step was to check the control module wiring. But before doing so I contacted the manufacturer American Technology and they are saying that there is nothing built into their controller that limits or stops the slide. They thought it might be a switch in the motor but as far as we can see the only thing on the motor is the brake. Odd though because other controllers similar to mine say dual slideout current controller. They look very similar to mine.
