Breakdown Information
Moderators Note: This thread is intending to report a problem and its resolution. If you are seeking help or information to help you resolve a problem you would best be served by initiating a thread o...
Forum Discussion
Re: No start faulty relay, fan belt breakage, 1989 Chev P30 454 w/Quadrajet carburator, gasoline, Turbo 400 trans, 32'Southwind
Drivers, I have had the same trouble as nantra, but it will eventully start. Where exactly is the relay and what does it look like. I thought it may have something to do with the shift lever and neutral switch.
1989 Southwind P30 chassis, 454Chev.
My Chev. has broken the serpintine type belt driving the water pump twice. This installation turns the water pump in the standard direction whereas the newer serpintine belts turn the pump backwards from what we are used to. The problem seems to be that the contact covers less than 45 degrees of surface of the fan pully. When the fan clutch engages, the belt will slip and burn up.
I am installing Flexolite m/n 295 and removing the driven fan entirely. I hope the earlier chassis has the "V" belts.
Check list format is a great idea! Good Sam ERS has saved me twice. Jesse
Drivers, I have had the same trouble as nantra, but it will eventully start. Where exactly is the relay and what does it look like. I thought it may have something to do with the shift lever and neutral switch.
1989 Southwind P30 chassis, 454Chev.
My Chev. has broken the serpintine type belt driving the water pump twice. This installation turns the water pump in the standard direction whereas the newer serpintine belts turn the pump backwards from what we are used to. The problem seems to be that the contact covers less than 45 degrees of surface of the fan pully. When the fan clutch engages, the belt will slip and burn up.
I am installing Flexolite m/n 295 and removing the driven fan entirely. I hope the earlier chassis has the "V" belts.
Check list format is a great idea! Good Sam ERS has saved me twice. Jesse
