cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Cannot start engine

oldcoot
Explorer
Explorer
I have 2095 Fleetwood 39S Providence, there is a 5 amp fuse in the fuse block that blows as soon as you put it in. When I turn the ignition on the glow plug light does not come on and when you turn the ignition key to start nothing happens
Check the engine compartment and found a nest on top of the engine but cannot see any wires chewed up
Any ideas on what could be wrong
4 REPLIES 4

wa8yxm
Explorer III
Explorer III
5 amp fuses are usually control circuits
For example the step CONTROL switch
The battery Disconnect solenoid
It isolator solenoid
All have 5 amp fuses

There may be other 5 amp circuits as well.
Home was where I park it. but alas the.
2005 Damon Intruder 377 Alas declared a total loss
after a semi "nicked" it. Still have the radios
Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times

jdc1
Explorer II
Explorer II
Was that nest made from the wiring harness? Ugh.

wolfe10
Explorer
Explorer
Welcome.

Please "edit" your post to tell us what year (not 2095) and what engine you have.

Does the Allison shift pad illuminate when the key is turned on?
Brett Wolfe
Ex: 2003 Alpine 38'FDDS
Ex: 1997 Safari 35'
Ex: 1993 Foretravel U240

Diesel RV Club:http://www.dieselrvclub.org/

2bzy2c
Explorer II
Explorer II
Sorry that happened to you. The nest is certainly a good clue. It happened to me in the past. I just had to get a test light and start at the battery and trace the power to all components. I know it sounds time consuming, but there is little else you can do.
My advice is worth exactly what you paid for it.