genset will not start from remote switches
I have a Kohler 5ckm21 genset it will start from the switch on the genset itself but not from the switch above the stove or the dash board. When the genset is running the light come on the switch on t...
Forum Discussion
Turned out the splice wires at the genset were good, so I tried to trace the wires going forward on top of the gas tank where I lost them. However I noticed a larger wire bundle in front of the gas tank with several splices all at the same place which caused the wire splices to stick outside the spiral wrap. After examining the splices one wire came loose from the butt connector due to corrosion. Reconnected the wires and switches worked again. I want to thank everyone for your help in solving this problem.
