We have a 2007 Winn Voyage 38J on a Workhorse chassis, 8.1L Vortec gas engine. The passenger slide out has a window unit with 3 segments. The outer 2 panels swing out vertically. The center panel is fixed. The center panel double seal is bad, filled with condensation, and I need to repair.
My question is how to remove this center panel? It is not trapped between aluminum frame. Both side edges are exposed where they meet the outer panels. The top and bottom edges are flush with the aluminum frame, not under it. There are no clips or screws. All I can assume is it is pressed into a bead of adhesive?
Once removed I will tackle how to repair, either do myself, or take the panel to a glass shop. But my pickle is how to remove it.
I plan to call Winn Tech Support as well, but worried they won't have the details. I am hoping one of you may have done this before.
Thanks in advance....
TC&Z
2007 Winn Voyage 38J, gas 8.1L engine
2018 Jeep Cherokee flat tow