HWH 210 series HYD pump motor not working
Yesterday I went to use my jacks and only heard the relay click, went through the trouble shooting step on the manual and it said it was a bad motor. I also connected the positive from the battery and...
Forum Discussion
dougrainer wrote:Also from other Inernet searches the bolt spacing can be different, one guy tried 3 different Monarch motors that had 2 1/2 spacing for the attach bolts but his was 2 5/8 which is what mine is and the outside case is 3 1/8 dia.enblethen wrote:
When in HWH site the pump is a Monarch. There are motors available on Amazon. I didn't find a motor number listed on my paperwork.
found motor number. RAP90415. Replaced by AP14608
They make 3 inch and 4.5 inch motors. So you need to make sure the diameter is the same. Doug
