Kwikee Jacks Fail To Retract
I couldn't retract my jacks this morning. I got my manual and started trouble shooting. After removing the electrical connections and plugging them back in the lights started working on the control ...
Forum Discussion
I have successfully replaced my control panel with a wire built circuit. Most of my sensor sleeves are broken on my jacks, so I don't think they worked anyway. So I couldn't get up or all up indicators working. But having someone visual watch the jacks go up is fine by me.
From what I can tell I found this parts list PDF and it has a picture of an unistalled system. here I am fairly confident this is what's on my RV.
I found a simular post on this forum here But it is based on sending a ground signal to your pump vavles. My system is the opposite, I needed to send 12v positive to the system.
I will post pictures and diagrams soon. woot woot so happy.
From what I can tell I found this parts list PDF and it has a picture of an unistalled system. here I am fairly confident this is what's on my RV.
I found a simular post on this forum here But it is based on sending a ground signal to your pump vavles. My system is the opposite, I needed to send 12v positive to the system.
I will post pictures and diagrams soon. woot woot so happy.
