Lost hub cap

[Lar_s]

22.5 Aluminum wheel. Michigan roads robbed my center cap. Any idea where to order or pick up a new one?

[Lar_s]

Thx Pete.

These "so called" truck stops" with one exception won't even fit a truck, believe me, and none that I know actually carry truck accessories. Good web site though, don't think I have that one handy.

[Pete_k]

Lar's wrote:
It's the front wheel, 5 slot, dome shape, stainless.

No truck stops within at least 200 miles so guess I might be looking online.

Thx for the suggestions.

If your city in your side bar is right. Theres 19 fuel stops near you.
Fuel/ Truck stops
Pilots should have the normal ones. Wish they had the 19.5 ones for mine. Need only one and looks like I will have to buy a full set to get that one.
Pete

[ljhl]

I actually have lost 2 hubcaps from the same wheel and bought replacement caps with Spartan logo from RV Chassis Parts. Last time before I snapped the new hubcap on, I put 3 dabs of clear silicon paste/adhesive on the backside of the hubcap. It's been 2 years now and I haven't lost the cap again.

[Lar_s]

It's the front wheel, 5 slot, dome shape, stainless.

No truck stops within at least 200 miles so guess I might be looking online.

Thx for the suggestions.

[jcfontenot]

I just replaced one on a 22.5 Alcoa wheel. Here's the place. http://www.phoenixusa.com/

[rvis2005]

I just went through this...I learned there are several different styles. There are 4 clip, 6 clip etc. Plus there are deep or narrow ones. Make sure you get the right one or it won't fit. After buying several wrong ones, I called Monaco and they sent me the right one. I installed it today, perfect fit. I was also able to get the roadmaster logo sticker from the same phone call. Good luck. Tommy

[Rodz]

accsys wrote:
As others have said, the plain hub covers are available at many truck stops. If you have a Freightliner and want a hub with the logo, they are available at Freightliner shops, just call ahead with VIN and check availability.

That's what I did when I lost one. Freightliner had one for me the next day. And it's the right factory one not a cheap imported copy.

[two-niner]

Are you talking about the steer wheel which has a simple snap on cap??

The rear drive covers are held on to a bracket which allows the logo to be screwed into. I have seen broken welds on the (rear) bracket and the cover was missing.??

Kerry

[sljkansas]

If used is ok try Colaws RV salvage.

[accsys]

As others have said, the plain hub covers are available at many truck stops. If you have a Freightliner and want a hub with the logo, they are available at Freightliner shops, just call ahead with VIN and check availability.

[Passin_Thru]

EBAY IS it the snap-on center hub over the axle cover or a ring over the wheel? A lot of TSA Truckstops have them.Make sure you measure the hub diameter.

[RayChez]

X2 on big truck stops.

[iceyfingers]

Truck Stop chrome shop