LP tank service

wa8yxm wrote:
Meanwhile. IF you have not already done it...

A Extend-A-Stay or Stay-A-While (Extend-a-stay was the name back when Marshall Brass Made it, Stay-A-While is by Mr, heater, appears identical).

Put it between your tank valve's POL fitting and your regulator.. And you can feed in propane from an external tank when you need to.

Works good too.

Or Sturgi-stay. This is the one I got:

http://www.rvwholesalers.com/catalog/sturgi-stay.html?gclid=CjwKEAiAgranBRDitfSQk_P7vnMSJAAhx5G597QqSzCLQpsAb0LNWWFEZnq5jPaEFDe8rEwVD_vOohoCng7w_wcB

Works great.

Meanwhile. IF you have not already done it...

A Extend-A-Stay or Stay-A-While (Extend-a-stay was the name back when Marshall Brass Made it, Stay-A-While is by Mr, heater, appears identical).

Put it between your tank valve's POL fitting and your regulator.. And you can feed in propane from an external tank when you need to.

Works good too.

try a local propane company they can install another valve right on the existing filler,happened to my nephew a couple years ago when they were visiting us. We tried tapping on it and got it slowed down.Called local company and they came and put fitting in, cost $50 total

I had a problem with my bleeder valve last year ,took it two three propane shops , they were stumped. took it to my mom,pop rv shop and the bled off the gas took it apart ,full of rust. but its working again.