My engine won't run
I need some help with a 1994 Allegro Bus. We're trying to start the engine and not having any luck. The engine cranks over fine but no start. It has not been started in several months. It has run ...
Forum Discussion
wildmanbaker wrote:
JC, when you pump the primer lever, does it get hard and not pump anymore? If it doesn't, then locate the last filter before the injector pump and loosen the pressure tap fitting and bleed out the air.
Good luck.
No, it stays soft to the touch other than the spring in it.
For others, the fuel solenoid is working now. I don't think it was before. Hopefully, if I can get it primed and started, I will know for sure if the solenoid is working properly. My luck will be the solenoid is working but it still dies after releasing the key to the run position. I'm going to work on it again tomorrow.
