Pulling a utility trailer; hard lesson.
Lesson learned the hard way: 28" Winnie C with LONG rear overhang. Attached a small enclosed utility trailer with a "standard" length hitch. Found out the hard way that you can NOT turn very sh...
Forum Discussion
JaxDad wrote:
If the trailer doesn't weigh much you can get an extended length ball mount. I have one for my unit, it puts the ball about 16" further back than the standard unit.
16" sounds like a lot because it IS. ;-)
I had thought about that; 6" might be enough for the trailer to clear the back end in all but the worst ill-advised turns.
A little experimentation in a vacant parking lot will be needed.
I fear that an extension that it TOO long will magnify the already HUGE dip when going up a sudden grade.
