Remote switches not working on Genset
Finally fixed my Kohlar 5CKM21 genset and works fine from start switch on genset itself. Neither the dash remote switch or the remote start switch above the stove will start the generator. Both will w...
Forum Discussion
F4Jock wrote:That was the first thing I checked. There was a connection from the board to the inside of the genset electronic box, then another on the outside of box, then I saw a series of wire splices going to the out side plug. From there I assumed the wires went to the remote switches. Thinking one of those 4 connections was bad I checked continuity from each splice to the control board plug and all was good.
Had the same problem. Wires at the remote start plug on the genny were corroded. Rewired. Fixed it.
