Remote switches not working on Genset
Finally fixed my Kohlar 5CKM21 genset and works fine from start switch on genset itself. Neither the dash remote switch or the remote start switch above the stove will start the generator. Both will w...
Forum Discussion
All of the switches should be wired in parallel. Since you have voltage to the switch at the generator, then the issue should be the 12 volt feed to the other two switches. Using a voltmeter you should measure power on one side of each switch. If you do not, then you need to trace back to where the power stops. There might be a fuse in the hot line that has blown. I would expect the power to both switches to be coming from the same 12 volt source.
