Remote switches not working on Genset
Finally fixed my Kohlar 5CKM21 genset and works fine from start switch on genset itself. Neither the dash remote switch or the remote start switch above the stove will start the generator. Both will w...
Forum Discussion
MySuncoastRV wrote:Cannot see a 10 amp fuse inside genset cover. Saw and checked 2 5 amp fuses and a 15 amp fuse on the face plate and all were good. reset two 30 amp circuit breakers.
The stop portion of the switches uses a grounding circuit. The start switch uses a 12v input. The onboard switch is independent from the remote switches and that's why it functions as normal. Look for a 10amp fuse on the remote switch circuit within the generator cover. More than likely tucked within the wiring loom near the front panel. Hope this helps. Keep us posted.
