Remote switches not working on Genset
Finally fixed my Kohlar 5CKM21 genset and works fine from start switch on genset itself. Neither the dash remote switch or the remote start switch above the stove will start the generator. Both will w...
Forum Discussion
Thanks Bill for the explanation. I do have 3 wires going to the remote switch and read 12 v between the yellow wire and black wire and read 12v between yellow wire and metal stove hood(grd). I jumpered yellow to black wire and yellow to brown but still did not get it to crank over. I also tried to jumper yellow 12v wire to metal hood but still did not get a start. I am beginning to wonder if the board circuits are bad where remote wires connect.
