Seat Recover

skrams wrote:
You can buy just the covers????

Yes Pm me I will send you the info

We bought covers from Thor at cost as our seats wore out years ago. We try extra hard to protect them now as we know the material is very cheap. We had someone put the covers on.

We also had to have our couch and euro chair recovered too, but we had someone recover it with better material...cost a pretty penny, but it looks better than it did and we know it will last.

You can buy just the covers????

fourmat wrote:

Geocritter wrote:
I'm interested in how you got the arms off of your Flexsteel chairs. Since my chairs double as seating when I'm parked I'd love to make them more comfortable.

Steve

Rotate armrest full up push in on armrest at pivot point I use my knee and continue to rotate up then pull them out

Thank you for the information!

Steve

Dutch_12078 wrote:
Nice!

Thanks

Geocritter wrote:
I'm interested in how you got the arms off of your Flexsteel chairs. Since my chairs double as seating when I'm parked I'd love to make them more comfortable.

Steve

Rotate armrest full up push in on armrest at pivot point I use my knee and continue to rotate up then pull them out

Cbones wrote:
Nice job. Did you replace the foam? How difficult would you say the whole job was?

No foam was fine just lousy material
Took me 3 1/2 hours per seat after removed from motorhome.
Only special tools you need is a no.2 square drive screwdriver,hog ring pliers and rings. It is not that difficult but you have to take your time and be careful cutting holes for arm rest and recliner.
Arm Rests are a hard to get screws lined back up after you remove flex steel name plates. Removing seats from motorhome is easy 4 bolts and 2 seat belt bolts you have to remove armrests to get them out the door takes about 10 min ea

I'm interested in how you got the arms off of your Flexsteel chairs. Since my chairs double as seating when I'm parked I'd love to make them more comfortable.

Steve

Nice job. Did you replace the foam? How difficult would you say the whole job was?

ddndoug wrote:
I have the same problem...

If you don't mind me asking, what did the new covers cost you?

Doug

275.00 ea from Flexsteel PM me I can send you all info if you want to contact them