Slide out cover detached roof trim
While doing my pretrip inspection today I noticed that the trim molding covering the gap between the metal roof and the sidewall was pulled out. On further inspection, it looks like wind pressure on ...
Forum Discussion
We had the exact same situation occur on our 2001 Ambassador 38PST. It occurred on the kitchen slide, and I removed the slideout cover, cleaned up the area and clamped it down as well as possible and rescrewed it together using self-drilling hexhead stainless screws. I put in 3 times as many as the factory had used and never had a problem over the next 50k miles. The screws are going into aluminum so be careful not to overtighten. As said, doable for a DIY type but need an extra person to help remove the slideout cover. I watched all three slide outs after that for the same problem. Hope this may help, Happy Trails Bert
