Forum Discussion

bluwtr49's avatar
bluwtr49
Explorer II
Jul 29, 2016

Splendide Ventless W/D Comments

This post is not to discuss the pros and cons of ventless W/D since we already know that the vented models are superior for drying. I do however just want to pass along an interesting observation.

Before we bought this coach a couple of years ago we had always had the vented models and they were OK but let's face it small 120 VAC electric dryer is never going to be great but are at least adequate. When we bought this coach it was our first experience with a ventless model and it was a disappointing experience at best....clothes would never dry well no matter how long it ran. The coach layout precludes changing to a vented model so we just made do.

As I started digging into alternatives I found out from Splendide tech support that the ventless models require a periodic service to clean the outside of the drum where the condensation takes place and they even sent me the procedures to do so but it required pulling the W/D and removing the top to access the drum...tough for me to do. We were ready to buy a new Dometic W/D (different condensing methodology) but decided to have the W/D service performed while we were in Bend for out annual service visit.

Amazing improvement!!!! DW now reports this old ventless is drying as well as our previous vented model. So, if you have a ventless model what isn't drying well it might be worthwhile to spend the 2 hours or so to clean the drum.
  • Well, MY experience has been with BRAND NEW Ventless Splendide. NONE would dry completely and we had to replace 3 with vented and after that we would not order or install a Ventless Splendide. These were NEW, and obviously NOT needing a pull and service. Doug
  • I have an old one that just would not dry worth a hill of beans. last here were were at the Beaver service center in Bend and I had them clean the drum and now it works as good as our vented model did on our previous coach.
  • It helps to keep things ClEAN, however, the ventless will still always be rough. Hours and hours.. :oP The vented is even rough compared to home dryers.... But of course we are dealing with 120V here.
  • Thanks for this great info. We just bought the ventless for the same reason. It's brand new and won't tumble when drying. I got an error code that said to call tech support. Of course it's Friday. I'm hoping it will be an easy fix and they will pay for service here in the Keys.....
  • I can't help but wonder if many of the negative experiences could have been prevented by proper maintenance. If I can find the procedures I will append them to this post.