JimR 1 wrote:
mike brez wrote:
Right now your on regular trans maintenance schedule.
To be able to go to the full tes 295 schedule you are suppose to drain trans fluid fill with tes 295 drive 30 miles drain trans fluid change filters and refill with tes 295.
Where did this come from, the drive 30 miles?
From this guy
Hi Folks,
My name is Tom Johnson and I was the former Transmission Fluids Engineer at Allison Transmission from 1990 until my retirement in 2009. I am a member of the Good Sam Club Class A motorhome forum and one of the members asked me to join the IRV2 forums.
I'm here to help with your questions about Allison Transmission fluid specifications, TranSynd, oil and coolant analysis, etc.
Let me know how I can help.
PS: You can call me "Mr. TranSynd" if you like..
JimR
Quote:
Originally Posted by monarchman53 View Post
My '03 Allison 1000 has 25000 miles on it and I would like to change it over to TranSynd. I keep hearing about "the two change change". I understand the principal but am not sure of the process. How far do I need to drive it after the initial change before draining and filling the second time. Also do I need to use two filters (one for each change) or one? If one, do I change at first or second fill?
Thanks,
Rod
Monarchman53,
Drive it around for maybe 1/2 hour just to be sure it's shifted through all the gears and warmed up. You just want to circulate it through the torque converter and cooling system. You don't need to wait any longer than that before doing the second drain and refill. I don't believe it matters much on the filter but, to make it easy, just change it before the second refill. That should do it for another 150,000 miles.