The Dieselfication of FMC #1046
A number of you are aware of the project that I have going on with my 1976 FMC as there has been a link to the photo album that follows the project in my signature for some time. I have also done a l...
Forum Discussion
The engine support brackets that were removed from the donor vehicle are here. If you page forward through the pictures you will see them attached to the engine so that I could determine how to attach them to the frame. The fuel pedal is also now in it location in the last couple of pictures.
The rear frame member has been taken to a welding shop to be disassembled and revised to allow for the additional length and depth of the engine.
I will now be in Oregon for a couple of weeks so we will be in standby mode. The transmission support beam has been designed and its parts will be cut while I am in Oregon.
The rear frame member has been taken to a welding shop to be disassembled and revised to allow for the additional length and depth of the engine.
I will now be in Oregon for a couple of weeks so we will be in standby mode. The transmission support beam has been designed and its parts will be cut while I am in Oregon.
