Vacuum Flush question
Does anyone have experience with the Vacuum Flush system? The panel turns red when it's not OK to flush (when water pump is active), and green when it's OK. I've caught ours twice now hung up on red...
Forum Discussion
The vacuum is held between the duck bill flapper at the outlet of the vacuum pump and the flush seal in the toilet bowl. Usally its a small piece of tissue at the toilet seal that causes the Vacuum to slowly be lost keeping the pump running and the red light on. When the system sits idle for a long time with the switch on, vacuum will slowly be lost causing the pump to cycle back on. This is normal.
When in storage, I turn my pump off,
When in storage, I turn my pump off,
